disable dialer on Vista 20P
#1
Member
Thread Starter
Join Date: Jan 2007
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
disable dialer on Vista 20P
Could someone help point me in the right direction to disable the dialer and line monitor functions. My system is only used to activate an interior and exterior horn. I don't need the dialer. I think this is causing the annoying beep ever so often. Thanks in advance.
#4
Member
Join Date: Apr 2009
Location: Boca Raton Florida
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts
everyone is so unclear in these forums
I have a safewatch pro 3000 or ademco24 // how do you get into programming to disable the dialer portion and stop the 94 error. been getting this since switching to voip. Any help would be greatly appreciated.
#5
Forum Topic Moderator
It's a modified Vista 20p, websearch using the phrase "Vista 20P installer manual".
In the sticky titled "Alarm Forum FAQ (Please read before posting), the basic steps to access programming so you can extract the installer code are posted. Once in there, you disable the dialer using the keystrokes from this thread.
In the sticky titled "Alarm Forum FAQ (Please read before posting), the basic steps to access programming so you can extract the installer code are posted. Once in there, you disable the dialer using the keystrokes from this thread.