Removed screw but chuck won't come off.


  #1  
Old 05-16-17, 11:43 AM
B
Member
Thread Starter
Join Date: Jul 2014
Location: usa
Posts: 433
Received 1 Upvote on 1 Post
Removed screw but chuck won't come off.

i have replaced chucks on this worthless sears drill twice before, Cannot remember HOW does the chuck come of.....once... the center screw is removed.bout ready to throw it out in front of SemiAny help i'm grateful for. bob s



its a left handed thread on the small center screw inside chuck if that matters?/
 
Attached Images  
  #2  
Old 05-16-17, 12:45 PM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Jersey
Posts: 64,929
Received 3,950 Upvotes on 3,543 Posts
Yep.... the chuck retainer screw is reverse threaded.

Usually after that screw is out it's just a tight press fit on to the drill shaft.
 
  #3  
Old 05-16-17, 01:50 PM
B
Member
Thread Starter
Join Date: Jul 2014
Location: usa
Posts: 433
Received 1 Upvote on 1 Post
Got her all taken care of today. I thank you guys for showing up to help me, means alot to me. bob s
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: