Door Pulls

EMTEK PULLS - BRASS PULLS 8 in Hole Spacing Drilled and Tapped with 1/4 in-20 Thread Supplied with both 1/4 in-20 Screws and 10-32 Screws Supplied with Adapter for 10-32 Thread Emtek has implemented a Minimum Advertised Pricing Program Please call our Sal...

STAINLESS STEEL SLIDING DOOR HANDLE Material 304 Stainless Steel Finish Satin

By-Acon Manufacturing APGBP 5 in x 1-1/2 in Large Door Pull 5 in x 1-1/2 in 7/8 in Projection 4 in Center handle length Smooth Iron For light interior doors cabinet doors and drawers Black and Russet finishes are standard finishes All other finishes are ...

By-Acon Manufacturing 6-3/4 in x 2-1/8 in 1-5/8 in Projection

By-Acon Manufacturing 8-3/4 in x 2-1/4 in 1-1/2 in Projection

By-Acon Manufacturing 7-3/4 in x 2 in 1-5/8 in Projection

EMTEK PULLS - BRASS PULLS 8 in Hole Spacing Drilled and Tapped with 1/4 in-20 Thread Supplied with both 1/4 in-20 Screws and 10-32 Screws Supplied with Adapter for 10-32 Thread Emtek has implemented a Minimum Advertised Pricing Program Please call our Sal...

EMTEK PULLS - BRASS PULLS 8 in Hole Spacing Drilled and Tapped with 1/4 in-20 Thread Supplied with both 1/4 in-20 Screws and 10-32 Screws Supplied with Adapter for 10-32 Thread Emtek has implemented a Minimum Advertised Pricing Program Please call our Sal...

Every piece has the distinctive touches which clarify and reinforce fine architecture and design Omnias dedication to detail is revealed in their selection of solid brass trim hardware After hand polishing and high buffing a hard and transparent lacquer i...

Every piece has the distinctive touches which clarify and reinforce fine architecture and design Omnias dedication to detail is revealed in their selection of solid brass trim hardware After hand polishing and high buffing a hard and transparent lacquer i...