Grounding Rods and Clamps

Ground Rods

5/8X8 Galv Grnd Rod
5/8`` x 8`, Galvanized Ground Rod, Zinc Coated High Strength Steel, Minimum Zinc Thickness 3.9 Mils, Meets NEMA & ANSI Standards, Non UL Listed.
1/2 X 8 Grounding Rods Copper
Grounding Rods Copperbonded Copperbonded Dia. Ins. X Lgth. F=1/2 X 8
5/8X8 Bonded Grnd Rod
5/8`` x 8`, Bonded Ground Rod, Uniform Electrolytic Copper On Steel Core, Minimum Copper Depth 10 Mils, UL Listed.
1/2X8 Bonded Grnd Rod
1/2`` x 8`, Bonded Ground Rod, Uniform Electrolytic Copper On Steel Core, Minimum Copper Depth 10 Mils, UL Listed.
5/8X6 Galv Grnd Rod
5/8`` x 6`, Galvanized Ground Rod, Zinc Coated High Strength Steel, Minimum Zinc Thickness 3.9 Mils, Meets NEMA & ANSI Standards, Non UL Listed.

1/2-1 Ul Zinc Pipe Clamp
Grounding Clamps Zinc Pipe Size Ins.=1/2 - 1
Floor Sanding Disc - for Rental Service - 150 Grit
Floor Sanding Discs Rental ``Screen-Bak`` 17`` Grit=150
1-1/4-2 Ul Copper Pipe Clamp
Grounding Clamps Copper Pipe Size Ins.=1-1/4 - 2
1/2 1 Grounding Clamps Zinc
Grounding Clamps Zinc Die Cast Finish=Zinc
1/2-1 Ul Copper Pipe Clamp
Grounding Clamps Copper U.L. Listed For Direct Burial Pipe Size Ins.=1/2 - 1
more Grounding Clamps

Grounding Clips
Grounding Clips
Grnd Bar Kit
Ground Bar Kit, For 100A Main Lugs Load Center, Necessary With Equipment Used As Service Entrance.
Grnd Bar Kit
Ground Bar Kit, For 100A Main Lugs & Main Breaker Load Center, 1-16 Circuit, Necessary With Equipment Used As Service Entrance.
2Pk Grounding Pigtail
2 Pack, 12 AWG Stranded Copper Grounding Pigtail, Green Insulation, Grounding Screw Pre-Installed On One End, Opposing End Has A Spade Terminal, Carded.
Grounding Clips
Grounding Clips Carded
more Grounding Clips, Kits, Pigtails and Screws