What You Need
- Pencil and Hand Level
- Screwdriver to Fit Hinge Screws
- Wood Putty
- Dremel #330 Router Attachment
1. Use hand level to determine how much you need to straighten door.
2. After removing the door and hinges, fill the hinge screw holes with wood putty.
3. Once correction is determined, mark new hinge location for routing.
4. Route new hinge locating using #330 Router Attachment, then use new hinge as template for new screw locations. Drill pilot holes and install.
Courtesy of Dremel Tools
. Questions of a Do It Yourself nature should be submitted to our "