Cleaning Instructions for Your UltraVection Oven

Caution: Do not immerse the oven in or splash with water or other liquid.

Note: Do not use harsh abrasives on any part of the oven.

1. Always unplug and allow to cool completely before cleaning or moving.
2. Remove basket. The glass window and wire basket may be disassembled for cleaning. Lay basket flat and pinch sides of the basket together, loosening it from the door tabs and hooks. Clean and reassemble, making sure the top of the wire basket fits securely into door tabs and hooks.
3. Using a damp cloth and plastic scouring pad, wipe the inside of the oven cavity and heating elements removing any food residue or grease. Dry thoroughly.
4. Remove drip tray. Wash drip tray and basket in hot, soapy water and dry thoroughly. The basket and tray may also be washed on the top rack of the dishwasher.
5. Reassemble making sure the top of the wire basket fits securely into door tabs and hooks.
6. Slide drip tray into the oven and replace the food basket.
7. Clean exterior with clean, damp cloth and dry thoroughly after each use.
   • Note: Do not use without drip tray in place.

Bulb Replacement

1. Unplug unit and allow oven to cool completely.
2. Remove the one screw securing the small cover plate in back of the unit.
3. Remove bulb by turning.
4. Replace with new 25 watt bulb (P/N 21270E).
5. Replace the cover and secure with screw.

Any service requiring disassembly, other than the cleaning described previously, must be performed by a qualified electrician.

Storage

1. Be sure the UltraVection oven is completely cool before storing.
2. All parts should be thoroughly cleaned and dried.
3. Always store with basket in place.

Courtesy of Toastmaster