Deburr Pipe for Connection Deburr Pipe for Connection

What You'll Need
Dremel D-Vise #2214


1. For a clean connection between metal pipes, you'll need to smooth the ends and remove burrs.






2. Secure the pipe in the D-Vise so it won't move as you work on it. If the pipe is very large you can clamp or tape it to your work surface.






3. Use the #952 stone to clean burrs from the pipe end.



4. Finish with a #428 brush to polish the pipe end for clean insertion into its connector.





Courtesy of Dremel Tools

Got a New Project You're Proud of?

Post it on Your Projects!