Mini split Problems!! Turns off
#1
Member
Thread Starter
Join Date: May 2007
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Mini split Problems!! Turns off
i have a couple of mini splits and was wondering if anyone here can help me trouble shoot the problems.
i have one unit that just turns off after about 30 mins. it blows cold air but just turns off by itself. this is a bondaire model.
i have another unit that won't cool when its cold outside. this is a 3 ton dual zone 17+17 Mitsu MrSlim model. I think its under charged but not sure if that is the cause.
i'm in a position where i need to fix the problem. i will begin at wyotech in june. any advice now would be appreciated.
thanks
i have one unit that just turns off after about 30 mins. it blows cold air but just turns off by itself. this is a bondaire model.
i have another unit that won't cool when its cold outside. this is a 3 ton dual zone 17+17 Mitsu MrSlim model. I think its under charged but not sure if that is the cause.
i'm in a position where i need to fix the problem. i will begin at wyotech in june. any advice now would be appreciated.
thanks
#3
Member
Thread Starter
Join Date: May 2007
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
thanks for the reply
how do i clean the condensor on a mini split system?
the mitsu works fine when its hot out. which is strange. if it gets down to say 50-60 degrees F it doesn't work as well. i called mitsu and they said those units are designed to work down to 14deg F. so something is wrong. under charged?
Thanks
the mitsu works fine when its hot out. which is strange. if it gets down to say 50-60 degrees F it doesn't work as well. i called mitsu and they said those units are designed to work down to 14deg F. so something is wrong. under charged?
Thanks