Water Furnace Spectra No heat
#1
Member
Thread Starter
Join Date: Dec 2012
Location: USA
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Water Furnace Spectra No heat
The display on the stat got too dim to read, so I changed the two AA batteries in the stat, now the heat fails to operate. The fan will run on manual. The Aux heat will not operate. There are two flashing green leds in the unit.
I could not find a fuse or reset button, it there one?
I did fail to change the batteries properly, its suppose to be one at a time and I removed both and replaced both at the same time.
I could not find a fuse or reset button, it there one?
I did fail to change the batteries properly, its suppose to be one at a time and I removed both and replaced both at the same time.
#3
Member
Thread Starter
Join Date: Dec 2012
Location: USA
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Houston204
Thanks for taking the time to provide the link and pinpointing the pages for me. It turns out to not be the t-stat I have. Mine is Maple Chase 0962 and does not have the features mentioned in the manual, for example, I do not have a mode button.
I have checked the power sources as being there.
I'll continue to surf.
Thanks
Harry
Thanks for taking the time to provide the link and pinpointing the pages for me. It turns out to not be the t-stat I have. Mine is Maple Chase 0962 and does not have the features mentioned in the manual, for example, I do not have a mode button.
I have checked the power sources as being there.
I'll continue to surf.
Thanks
Harry