Goodman Defrost Board Settings
#1
Member
Thread Starter
Join Date: Dec 2013
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Goodman Defrost Board Settings
I have a Goodman heat pump with a defrost selection jumper as pictured. To set a 90 minute defrost, do you bridge the 90 + 60 (pins 1 and 2) or the 90 + a "common" pin (pins 1 and 4, the last before the 2 test pins) There is nothing in the installation manual or printed on the PCB indicating which pins to bridge.