Transformer Question

Reply

  #1  
Old 01-04-14, 05:15 PM
Member
Thread Starter
Join Date: Dec 2013
Posts: 4
Received 0 Votes on 0 Posts
Transformer Question

I replaced a transformer on my furnace and when connected I got an orange glow at a 12 pin connector point on a White Rodgers 50A50 241 control panel. The transformer was a dayton 120v 24v 40VA transformer I burnt out the board. I got a new transformer and board. Now that I finished getting my furnace up and running, I tested the transformer I bought and there is 120v coming from the input and the output side. I would have thought that the transformer would have been dead.

I am wondering whether I have any claim with Dayton or Grainger where I bought it. I was expecting the transformer to be dead rather than having any output let alone 120v.
 
Sponsored Links
  #2  
Old 01-04-14, 08:42 PM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Northern NJ - USA
Posts: 52,627
Received 339 Votes on 317 Posts
I have never seen a 24vac transformer put out 120vac.

If it, in fact, is new and putting out 120vac then you should have some recourse with Grainger.
Make sure you double check that transformer because if you bring it back to them.... they will.

Please let us know how you make out.
 
  #3  
Old 01-05-14, 01:53 AM
Former Member's Avatar
Member
Join Date: May 2006
Location: US
Posts: 782
Received 0 Votes on 0 Posts
Wow interesting. That will make you double check some voltages before you hook anything up. I am sure that is an anomaly but I will keep that in mind for the future.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
 
Ask a Question
Question Title:
Description:
Your question will be posted in: