Trane XR13 fan always on second stage
#1
Member
Thread Starter
Join Date: Jun 2014
Location: Canada
Posts: 7
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Trane XR13 fan always on second stage
Trane XV95 with XR13 air conditioner, just got the ac unit installed. When it's trying to maintain temp should it always be on second stage (high)? I can understand if you drop it by a few degrees, but should it not run on the low setting? I only have a single stage tstat, not sure if that matters with cooling. Also I think my dip switches may be wrong for the tonnage of my ac, does it make a difference? Any help would greatly appreciated.
#2
Member
Thread Starter
Join Date: Jun 2014
Location: Canada
Posts: 7
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Figured it out, had a look on the back of the furnace door and my dip switches were wrong. Switches 1 and 2 were set for a 3 ton unit. I also changed switches 3 and 4 to change the CFM from normal to low. Now it doesn't sound like a jet taking off when the fan kicks on. Hopes this helps somebody else