Hello - I'm at the end of my rope trying to have someone resolve my AC issue I have had 3 seperate people come out to my location to look at my system. The second person replaced a 35-5 capacitor on my compressor with a 40-5 capacitor. Verified with trane that it should have a 35-5 in there. The third person said this most likely fried my compressor and that I need to have them remedy the situation. Is this correct that a larger capacitor could fry my compressor? The fan runs fine - which I take is because the 5 in the capacitor rating matches what is supposed to be in there.

Looking for a little help. When i turn my thermostat on the condenser starts , I can feel cold air inside the furnace. I have checked the transformer and I have 24 volts. The control board status light doesn't come on at all. I tried going to heat and the unit does nothing. I'm thinking it needs a new board but I wanted to see if i'm missing something.