Danby AC Won't Turn On After Taking Apart to Clean. Loud Clicking Sounds.
#1
Member
Thread Starter
Join Date: Jul 2018
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Danby AC Won't Turn On After Taking Apart to Clean. Loud Clicking Sounds.
I took apart my Danby AC to clean it and now it won't turn on. I also left it outside accidentally with the back part taken off (as shown in video) for a couple of minutes and some rain got in it. I quickly wiped it down and I don't think anything got soaked too badly. I left it alone for a few hours before powering it on just to let it dry.
Video link: https://youtu.be/wnPsNpxxIfM
Video link: https://youtu.be/wnPsNpxxIfM
#2
It will turn on..... just not stay running.
The only time I've heard clicking like that is when the unit has a powered louver and it gets stuck.
If it doesn't have a louver like that then the control board is clicking and for the most part is not serviceable.
The only time I've heard clicking like that is when the unit has a powered louver and it gets stuck.
If it doesn't have a louver like that then the control board is clicking and for the most part is not serviceable.