wire guage/type for Carrier blower circuit board
#1
Member
Thread Starter
wire guage/type for Carrier blower circuit board
Hello,
My hvac blower fan was not working, so I replaced the circuit board (hk42fz009 to a new one ICM282A). Everthing runs fine, however, since the configuration of the new board is different, the wire from the door safety switch (black wire) to the board is a little short. SO I could not screw the circuit board to the blower deck.
The wire is a 16 AWG 600V, style 1275.
I could NOT find a replacement at any hardware stores.
Question: where can I find a this wire or a suitable replacment.
Thanks for reading and your help
JK
My hvac blower fan was not working, so I replaced the circuit board (hk42fz009 to a new one ICM282A). Everthing runs fine, however, since the configuration of the new board is different, the wire from the door safety switch (black wire) to the board is a little short. SO I could not screw the circuit board to the blower deck.
The wire is a 16 AWG 600V, style 1275.
I could NOT find a replacement at any hardware stores.
Question: where can I find a this wire or a suitable replacment.
Thanks for reading and your help
JK
#2
#3
Member
Thread Starter
Thanks Pete.
The 16 AWG is not available, Can I use 14 awg. The wire has to be vw-1 and awm rated to 105 deg C
JK
The 16 AWG is not available, Can I use 14 awg. The wire has to be vw-1 and awm rated to 105 deg C
JK