HVAC handler X13 motor blower


  #1  
Old 10-29-19, 10:06 PM
E
Member
Thread Starter
Join Date: Oct 2019
Posts: 1
Upvotes: 0
Received 0 Upvotes on 0 Posts
HVAC handler X13 motor blower

Have MARS 10861 azure motor blower in my AC handler. When I connect the harness to 24 volts so the the motor could learn the needed torque, the motor runs for about 1 minute then turns off. I then discount the harness assuming it already learned, however it never work again.
The setup is x-13.
what should I do?
 
  #2  
Old 10-30-19, 07:32 PM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Jersey
Posts: 64,645
Received 3,339 Upvotes on 2,998 Posts
Welcome to the forums.

It sounds like you may not have followed the directions completely.
In the link is a pretty good video where the tech walks thru a complete X-13 setup.

Mars 10861 set up video
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: