Gyro removal
#1
Member
Thread Starter
Join Date: Nov 2002
Location: Canton Ohio
Posts: 1,334
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Gyro removal
I removed a factory stock Gyro from a 2006 Specialized BMX bike, the threadless seems loose. Do I need to add a spacer where the gyro was?
#2
Is the top stem of the fork threadless ?? Before the gyro there was a nut that tightened down over the bearing then a washer with a keyway built onto it then a plain washer and finally a nut.