Advise needed. How to unmount roller blind


  #1  
Old 08-12-18, 05:31 AM
N
Member
Thread Starter
Join Date: Aug 2018
Location: SG
Posts: 6
Upvotes: 0
Received 0 Upvotes on 0 Posts
Exclamation Advise needed. How to unmount roller blind

Hi,

I am trying to remove a 6 years old roller blind installation, but I have no clue how to begin.
I recalled briefly it is supposed to be a spring clip on thingy but this is as far as I can remember.
Pls see attached with the view of the mounting bracket.

CL
 
Attached Images   
  #2  
Old 08-12-18, 05:42 AM
XSleeper's Avatar
Group Moderator
Join Date: Dec 2004
Posts: 27,045
Received 1,905 Upvotes on 1,711 Posts
You push that tab to the side and pull out.
 
  #3  
Old 08-12-18, 06:41 AM
N
Member
Thread Starter
Join Date: Aug 2018
Location: SG
Posts: 6
Upvotes: 0
Received 0 Upvotes on 0 Posts
Hi XSleeper,

Tks. Can you elaborate further?

Push the tab to the side, and pull what out exactly? Pull the tab out itself or pull the whole roller blind down?
 
  #4  
Old 08-12-18, 06:45 AM
XSleeper's Avatar
Group Moderator
Join Date: Dec 2004
Posts: 27,045
Received 1,905 Upvotes on 1,711 Posts
The button is like a latch. You push the latch to the side, (left) then grasp the whole roller blind and give it a sharp yank straight out to pop it off the mount. Since each blind has multiple latches, you do them one at a time... moving them each just a lititle bit until all the latches have been released.

It might help you to get on a chair or ladder so that the blind is right in front of you. You don't pull down on the blind at all... just out... perpendicular to the wall.

If it helps, this is likely your care manual: https://cdn2.hunterdouglas.com/stati...te-install.pdf
 
  #5  
Old 08-12-18, 07:16 AM
N
Member
Thread Starter
Join Date: Aug 2018
Location: SG
Posts: 6
Upvotes: 0
Received 0 Upvotes on 0 Posts
Tks so much. Will try and let you know how it goes...
 
  #6  
Old 08-14-18, 06:20 AM
N
Member
Thread Starter
Join Date: Aug 2018
Location: SG
Posts: 6
Upvotes: 0
Received 0 Upvotes on 0 Posts
Hi,

The tab will move. I cannot shift it by 1mm to the right or left, even with the help of a pliers. The only direction it can move is to blend down slightly.
 
  #7  
Old 08-14-18, 07:33 AM
XSleeper's Avatar
Group Moderator
Join Date: Dec 2004
Posts: 27,045
Received 1,905 Upvotes on 1,711 Posts
Give us a picture of the back side of the roller shade, please... where the bracket is located.
 
  #8  
Old 08-14-18, 08:06 AM
N
Member
Thread Starter
Join Date: Aug 2018
Location: SG
Posts: 6
Upvotes: 0
Received 0 Upvotes on 0 Posts
The 2 attached are actually the rear side of the roller blind. You cannot see anything from the front.
 
  #9  
Old 08-14-18, 08:19 AM
XSleeper's Avatar
Group Moderator
Join Date: Dec 2004
Posts: 27,045
Received 1,905 Upvotes on 1,711 Posts
I think someone may have installed it backward then.

https://youtu.be/PLF6A6pJcKo
 
  #10  
Old 08-20-18, 02:51 AM
N
Member
Thread Starter
Join Date: Aug 2018
Location: SG
Posts: 6
Upvotes: 0
Received 0 Upvotes on 0 Posts
Hi,

I have done it. It need to be pushed in laterally. Tks everyone for the advise.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: