Relay enclosure
#1
Member
Thread Starter
Join Date: Mar 2006
Location: USA
Posts: 197
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Relay enclosure
I need to use 3 relays in my system to control a particular pump, and I'm not sure what to use for an enclosure. The relays will be carrying 120V on the contacts and/or coils, so leaving them in the open is not an option.
These are Tekmar 003 and 004 relays, with bases.
I'm not using a relay center for this, they are just 3 standalone relays needed for some control logic in my system.
I've been trying to find a metal or plastic electric box, but can't seem to find anything appropriate. I'm not sure I like the idea of a metal box when there are bare 120V terminals inside, but can't seem to find any large plastic boxes that have knockouts - they all have Romex clamps, but I want to run BX...
Any suggestions?
These are Tekmar 003 and 004 relays, with bases.
I'm not using a relay center for this, they are just 3 standalone relays needed for some control logic in my system.
I've been trying to find a metal or plastic electric box, but can't seem to find anything appropriate. I'm not sure I like the idea of a metal box when there are bare 120V terminals inside, but can't seem to find any large plastic boxes that have knockouts - they all have Romex clamps, but I want to run BX...
Any suggestions?