I have a Hydrotherm HW-100 boiler that I installed last fall. It ran without issue last winter. This year I cannot get anything. No vent fan, no circ pump, not clicking at all. I checked and it is still getting power. Can someone give me some direction on what to check next? If the Thermostat wasn't working properly would that cause the unit not to do anything? I also noticed that the transformer is not warm at all. Should it be? Thanks in advance for some words of wisdom.

hi, i went to start up the boiler yesterday for the season and forgot to bleed the lines:wall:(tank was empty). i hit the reset button and it lit but quickly went out, probably hit an air bubble. i hit the reset twice and nothing happaned, at this point i remembered to bleed the lines and i went to hit the reset button for the 3rd time but it appears to now be stuck in lock out. i had this happen before and the service tech explained that it will do this after you hit the reset button 3 times so you wont keep pumping oil in their if its not lighting. i am just wondering if there is any way that i can "unlock" it? i had the power to the unit off over night and that didnt help.