someone help w/ how to charge for a job.

Old 08-17-07, 06:35 AM
Thread Starter
Join Date: Aug 2007
Posts: 1
Upvotes: 0
Received 0 Upvotes on 0 Posts
Red face someone help w/ how to charge for a job.

Is there anyone out there who knows how to fairly charge for masonry jobs. I know the trade well, I've been doing it for 10 + yrs., but I still don't know how to charge for the job. Currrently looking do a job, my question is what do I charge for the brick, dry stone, joint stone at 2to3in.fake stone.,joint cones.If any one could give me some insights I'd greatly appreciate it.
Old 08-17-07, 01:00 PM
Join Date: Apr 2007
Location: Canada
Posts: 401
Received 4 Upvotes on 4 Posts
Try time and materials.


1) your labor hours at your hourly rate
2) plus the cost of materials, taxes, etc. with a small markup of about 10%
3) plus cost of using any equipment and vehicle(s), either rental costs plus 10% or a suitable hourly rate for each piece if you own it.

Thread Tools
Search this Thread
Ask a Question
Question Title: