Replacing existing driveway. Help, please.

Old 06-15-08, 07:02 AM
Thread Starter
Join Date: Aug 2007
Location: Alabama
Posts: 90
Upvotes: 0
Received 0 Upvotes on 0 Posts
Replacing existing driveway. Help, please.

My driveway is 500' of asphalt, to a "landing" of concrete 30' x 40'. This concrete part is 15 years old and has many cracks and 2 areas that sound "void" and is on a gentle slope. Rather than replace with concrete, I'd like to try pavers. Here are my questions and thank you, as always, in advance for the great advice in here. This place ROCKS! --Bryant

1. I'm assuming that here are specific pavers for this application (vehicles)..? One of my trucks is a dually.
2. Putting in pavers for this application, is mortarless best?
3. The base: where do I begin? sand, crushed rock, plastic on the dirt...??...landscaping cloth...??
4. I'll surely read all I can on this before I start, but I appreciate the "live" help you can get in here.

Thanks again. --Bryant
Old 06-16-08, 08:08 AM
Join Date: Nov 2001
Location: Taylors, SC
Posts: 9,261
Upvotes: 0
Received 0 Upvotes on 0 Posts
This section of might be a good place to start reading.

Hope this helps.

Thread Tools
Search this Thread
Ask a Question
Question Title: