Liner for a cylindrical form


  #1  
Old 04-19-09, 08:47 PM
V
Member
Thread Starter
Join Date: Apr 2009
Posts: 2
Upvotes: 0
Received 0 Upvotes on 0 Posts
Liner for a cylindrical form

After seeing a "column form insert" example in a book at the hardware store, I asked the clerks where I could find such a thing, and they had no clue. So I searched online and found that these kinds of things are usually called "form liners"; they are used to give concrete a given surface relief, although the examples given for them are always on a flat surface, such as a wall.

I'd like to find out if there are form liners made for tube forms (12ft) that will add a pattern or texture to the formed pillar without leaving a seam line.

Any ideas?
 
  #2  
Old 04-20-09, 03:05 PM
V
Member
Thread Starter
Join Date: Apr 2009
Posts: 2
Upvotes: 0
Received 0 Upvotes on 0 Posts
Follow Up

I emailed the makers of Symons form liners, and got information from them on this issue. It is possible to roll liners with narrow patterns inside a form. Thanks for reading.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: