Precast patio bar top
#1
09-17-14, 05:16 AM
Join Date: Sep 2014
Location: USA
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Precast patio bar top
I want to precast a 4'x10' patio bar top with a 12" overhang on one side and end but not sure how thick to make the slab. I was thinking 2" might do but am afraid that it won't be thick enough for the size of top. But if I make it thicker the top might be to heavy to move. I have looked into GFRC products but I still would not know how thick to make it. I am open for suggestions.
#2
09-17-14, 05:44 AM
2" is fine - we use carbon fiber grid placed exactly @ the vertical midpoint of the form & no closer than 1" to any edge,,, for better strength, we also use corbels under the finished top
