Retaining Wall not level

Reply

  #1  
Old 09-24-18, 07:26 PM
Member
Thread Starter
Join Date: Sep 2018
Posts: 1
Retaining Wall not level

I just built a 4 1/2 foot retaining wall using hallow core liberty stone and when having final grading and backfill done a 15 section of a 75 wall got pushed out of level front to back by 3/4 of an inch at the center of deformation and tapers back to level on both sides. Wall has about 2 of drainage stonedrain pipe at footing and 2 layers of 4 bi directional geo grid. Wall still has 1 1/2 in of batter at worst point. Is wall in danger of failure?
 
Sponsored Links
  #2  
Old 09-25-18, 02:17 AM
Marq1's Avatar
Member
Join Date: Sep 2016
Location: USA MI
Posts: 2,663
I believe the term is flush,

3/4" over 75', doubt it can even be seen!
 
  #3  
Old 09-25-18, 04:42 AM
Group Moderator
Join Date: Mar 2003
Location: NC, USA
Posts: 17,949
What happened to the geogrid in the leaning area? Are both levels of grid still attached to the wall?
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes