Relocating a phone jack with wiremold

Reply

  #1  
Old 12-08-18, 05:01 PM
S
Member
Thread Starter
Join Date: May 2015
Location: United States
Posts: 458
Received 26 Votes on 18 Posts
Relocating a phone jack with wiremold

I need to relocate a phone jack a couple feet, and for the ease of it, I would like to make that last couple feet run on the surface in wiremold, and surface mount the new jack. I've never used wiremold or other raceway before. None of the surface mount jacks I have found seem to be compatible with wiremold. Am I supposed to run it to a wiremold box, and use a flush-mount jack on the box instead?
 
Sponsored Links
  #2  
Old 12-08-18, 05:14 PM
Tolyn Ironhand's Avatar
Group Moderator
Join Date: Nov 2007
Location: Twin Cities, MN
Posts: 13,631
Received 209 Votes on 185 Posts
Run it to a shallow wire-mold box and then get a phone jack plate that mounts to the box. Like this: https://www.homedepot.com/p/Leviton-...-PMT/202059794

Shallow box: https://www.amazon.com/Legrand-Wirem...25404281&psc=1

You may also want to look at Wiremold or Panduit plastic raceway which can be easier to install.
 
  #3  
Old 12-08-18, 05:20 PM
S
Member
Thread Starter
Join Date: May 2015
Location: United States
Posts: 458
Received 26 Votes on 18 Posts
Fantastic! That's the idea I was trying to convey. Unfortunately, not being familiar with the products, I lacked the words to describe it. Thank you!
 
Reply
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: