Rnaap
#1
#2
Go here for removal info if needed:
http://www.modemhelp.net/newsletter/...atrnaapp.shtml
RNAAPP (Remote Network Access Application) is a core executable for Microsoft Windows Dial-Up Networking. RNAAPP can create a problem when trying to get Internet access by sometimes sticking in memory from a previous session, or too early in a dialup attempt, thus making your system believe that a connection is already established. The error messages "Dial-up Networking could not-establish a compatible set of network protocols…", "No dial tone", "Unable to Open Communications Port", "The Line is Busy…", "The Modem is Being Used…", and "Error 602: The Port is Already Open" are all common errors that you may receive with RNAAPP improperly loaded into memory.
http://www.modemhelp.net/newsletter/...atrnaapp.shtml
RNAAPP (Remote Network Access Application) is a core executable for Microsoft Windows Dial-Up Networking. RNAAPP can create a problem when trying to get Internet access by sometimes sticking in memory from a previous session, or too early in a dialup attempt, thus making your system believe that a connection is already established. The error messages "Dial-up Networking could not-establish a compatible set of network protocols…", "No dial tone", "Unable to Open Communications Port", "The Line is Busy…", "The Modem is Being Used…", and "Error 602: The Port is Already Open" are all common errors that you may receive with RNAAPP improperly loaded into memory.
#4
Member
Join Date: Nov 2001
Location: Taylors, SC
Posts: 9,261
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Windows loads lots of things in the background if they are consistent with your use. If you have dial-up networking installed, it makes sense to have it ready when you dial your ISP. It saves time.
Hope this helps.
Hope this helps.