Computer Error Problem-printing


  #1  
Old 08-12-06, 09:04 PM
T
Member
Thread Starter
Join Date: Mar 2005
Location: Minnesota
Posts: 31
Upvotes: 0
Received 0 Upvotes on 0 Posts
Computer Error Problem-printing

I cannot seem to print on my HP 130 series photo printer. When using HP image editor, I go to print and the mircosoft error comes up to send an error report. It does this everytime.

When trying to print from Nero photo it does the same thing. Even printing direct from a web page will result in the same.

I unistalled the printer and re-installed. It worked for 3 photos and now does it again.

Anyone have any suggestions?
 
  #2  
Old 08-13-06, 03:44 AM
M
Member
Join Date: Nov 2003
Posts: 120
Upvotes: 0
Received 0 Upvotes on 0 Posts
Printing Problems

Have you gone to the HP web site and downloaded the latest drivers for that printer?

If not I would try that first then let us know.
 
  #3  
Old 08-13-06, 09:04 AM
T
Member
Thread Starter
Join Date: Mar 2005
Location: Minnesota
Posts: 31
Upvotes: 0
Received 0 Upvotes on 0 Posts
Newest drivers are installed. Still same problem. I can't even get to print options on it.
I have my main printer hooked up to our other cpu. I can still print to that one from either computer.

When I run microsoft word it also crashes with the error message just after 30sec of it being ran.

I run Norton virus program. Computer seems clean. Can't seem to figure this out.
 
  #4  
Old 08-13-06, 06:44 PM
wilkindw's Avatar
Member
Join Date: Mar 2006
Location: Halifax
Posts: 56
Upvotes: 0
Received 0 Upvotes on 0 Posts
USB Connection?

Are you trying to print via an USB port? HP printers have been known to have problems USB printing with several Intel chipsets. Here's a good HP artical to start withHP Photosmart Printers - Resolving 'RTL will not Load Driver For HPHIPM09.exe' Error During Installation I know your problem isn't with installation but this article trouble shoots the whole process.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: