Porch steps warping


  #1  
Old 06-24-16, 01:05 PM
A
Member
Thread Starter
Join Date: Oct 2001
Location: USA
Posts: 278
Upvotes: 0
Received 0 Upvotes on 0 Posts
Angry Porch steps warping

Twice now I’ve installed new stair treads on my exterior wood porch steps only to have them “cup” or “curl” along the front edge. I painted/stained both times. The last treads were purchased from Lowes. Inch thick with underside scored with grooves along the length. What am I doing wrong?
 
  #2  
Old 06-24-16, 01:37 PM
M
Forum Topic Moderator
Join Date: Mar 2005
Location: USA - N.E.Tn
Posts: 45,659
Received 835 Upvotes on 732 Posts
What size and type of wood is it? Most exterior treads use 1x6 or 2x6 PT lumber. You look at the end grain and lay them so the crown is up. Treads wider than 8" generally split easily and can warp.
 
  #3  
Old 06-24-16, 01:49 PM
C
Member
Join Date: May 2015
Location: USA
Posts: 3,168
Received 169 Upvotes on 137 Posts
How far do the treads overlap the risers and how did you fasten the treads?

Did you paint both sides and all edges of the tread before you installed them? Painting/staining both faces helps equalize the drying rate of the lumber and can help resist cupping.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: