I need to shorten sliding screen door

Reply

  #1  
Old 09-09-17, 11:11 AM
Member
Thread Starter
Join Date: Jun 2011
Location: USA
Posts: 168
Received 0 Votes on 0 Posts
I need to shorten sliding screen door

What I need is 48x79. I already bought 51x93 used, assuming I could just miter cut to length and reuse corner inserts. I am finding it's not that simple. The long vertical piece is no problem. But the horizontal pieces have a cutout for roller and another for a plastic piece for screw. One option is to save the rollers and the plastic piece for joining. I will have to cut in the middle (ends are not touched) and join them with a sheet metal and rivets. The other option is to cut 1.5" from each end and make new cutouts. I definitely need some new tool for the cutouts. Advice please.
 
Sponsored Links
  #2  
Old 09-09-17, 11:24 AM
XSleeper's Avatar
Group Moderator
Join Date: Dec 2004
Location: USA
Posts: 23,355
Received 223 Votes on 206 Posts
Sounds like a bad idea. You would need to insert something long and solid that fits tightly inside the frame at the splice or it will be very wonky.
 
  #3  
Old 09-09-17, 04:18 PM
Norm201's Avatar
Member
Join Date: Sep 2013
Location: United States
Posts: 7,475
Received 74 Votes on 69 Posts
Well I'm not saying this idea is a cure all. But I have mended screens and doors using a piece of wood slid into the cavity. It stiffens the cross arm. It doesn't have to be a perfect fit, but at the point of the two pieces joined I want a very tight fit.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
 
Ask a Question
Question Title:
Description: