Stairs Basement Bulkhead

Reply

  #1  
Old 07-30-19, 06:44 AM
R
Member
Thread Starter
Join Date: Jan 2019
Posts: 67
Received 0 Votes on 0 Posts
Stairs Basement Bulkhead

I need to replace the stairs coming out of the bulkhead entry from my basement and I dont know how to proceed because its a weird dimension. Unfortunately there are no stairs there now to just copy, so I dont know how it was originally setup.

I need to rise out 54" to the top of the bulkhead doors. Theres a entry door down below with a drain in front of it. The run would also be approx 54" from the back wall. So approx 5'x5'.

I was hoping to use precut stringers as I dont feel confident I would succeed in cutting them myself. However 7"/11" rise run is not going to work here... unless I flip over a precut 5 stair stringer!!! That would be a poor idea correct?

So do I have to resort to putting in a ladder here or can I get away with something else?
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: