how would you tell if older wood is pressure treated?

Reply

  #1  
Old 08-31-19, 09:53 AM
B
Member
Thread Starter
Join Date: Apr 2010
Location: US
Posts: 542
Received 0 Votes on 0 Posts
how would you tell if older wood is pressure treated?

Any way other than a green tint to tell if older wood is pressure treated? We built a dog house about 15 years ago. We're replacing the deck surface (which I thought was pressure treated plywood, but rotting / crumbling along a corner).

The lower part - being that there's minimal deterioration after all these years, it's likely PT?

Some of the 2x4s of the house itself had bugs / rot deterioration, so that's likely not PT.

Considering the situation - the stuff near the ground didn't rot / crumble / have bugs eating it, but higher up did, that lower stuff is PT? Beyond seeing that, are there ways you can tell a 2x4 is PT rather than just the color (and is that pretty accurate? cause this lower wood doesn't have a green tint to it... but it's been years since it was bought.
 
  #2  
Old 08-31-19, 06:49 PM
P
Group Moderator
Join Date: Mar 2003
Location: NC, USA
Posts: 24,460
Received 752 Votes on 691 Posts
Appearance and condition are one way to tell if wood is treated. Also, treated wood is usually pine while untreated wood is often spruce so they look different.
 
EdShnatter voted this post useful.
  #3  
Old 08-31-19, 09:18 PM
S
Group Moderator
Join Date: Oct 2004
Location: WI/MN
Posts: 19,614
Received 97 Votes on 85 Posts
I can't see untreated S/P/F lasting 15 years outside.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: