Georgia PAcific Tile Board Problem
#1
Member
Thread Starter
Join Date: Aug 2007
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Georgia PAcific Tile Board Problem
We are using water based construction adhesive, per instructions. Our GP tile board is "growing" after we glue it up. As much as 1/8" on all sides. The problem is that the edge glue is holding and the sheets are buckling and splitting the glue film. It is buckling even on smaller 2'x3' sections.
The panels were put into the room 24 hours before installation.
Why is the tile board swelling and getting these "bubbles"?
Any help or tips greatly appreciated.
FL
The panels were put into the room 24 hours before installation.
Why is the tile board swelling and getting these "bubbles"?
Any help or tips greatly appreciated.
FL
#2
Member
Not sure what your doing. Is this a backerboard that you apply ceramic tile too or is this some kinda finished product that looks like ceramic tile?