Metal strip on countertop

Reply

  #1  
Old 04-24-18, 02:46 AM
S
Member
Thread Starter
Join Date: Apr 2018
Posts: 2
Received 0 Votes on 0 Posts
Metal strip on countertop

I am trying to redo my bathroom vanity countertop by painting it. So I do not want to ruin my exisiting laminate countertop. However, I have that lovely (insert sarcasm) metal cove strip between my backsplash and countertop. I do know that this metal piece is under my laminate countertop. How can I add backsplash without removing this metal strip. (I have read that the only way to remove it would be to ruin my laminate). I have heard that some take a 4” wide wood piece and place over but won’t that be uneven being the metal strip extends out a little bit more than the wall? Any sugeestions are appreciated as this has put a damper on my DIY project.
 
Sponsored Links
  #2  
Old 04-24-18, 02:48 AM
XSleeper's Avatar
Group Moderator
Join Date: Dec 2004
Location: USA
Posts: 26,004
Received 675 Votes on 624 Posts
Cut the back splash to fit over it.
 
  #3  
Old 04-24-18, 03:25 AM
S
Member
Thread Starter
Join Date: Apr 2018
Posts: 2
Received 0 Votes on 0 Posts
Are you saying to knotch out a little section at the bottom? Will this work for glass tile? What would I used to cut that? Also I have a metal trim piece at the top of my laminate backsplash, how could i cover that?
 
  #4  
Old 04-24-18, 03:33 AM
M
Forum Topic Moderator
Join Date: Mar 2005
Location: USA - N.E.Tn
Posts: 47,649
Received 319 Votes on 283 Posts
Would you have enough depth to install 1/2" cement board stopping it short at the bottom and then applying your tile? You'd need bullnose tile where the tile stops and meets the rest of the drywall.
 
  #5  
Old 04-24-18, 12:11 PM
Gunguy45's Avatar
Super Moderator
Join Date: Dec 2007
Location: USA
Posts: 21,119
Received 3 Votes on 3 Posts
I really don't know what it is you have...but when an offending strip of metal is in my way for some reason, a Dremel tool and metal cutting wheel normally do wonders.
 
  #6  
Old 04-24-18, 12:32 PM
P
Member
Join Date: Dec 1999
Location: Cleveland, OH USA
Posts: 593
Received 5 Votes on 5 Posts
I assume you are talking about the current backsplash being a separate piece from the countertop. If so, do a web search for "Schluter Strip". It may just be laid down under your current backsplash so that when you remove your current material you find it just lying on top of the laminate or mortared to the wall. I haven't seen one that goes under the countertop laminate so a picture might help.

- Peter
 
Reply
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: