Hello, We're planning to remodel our 1970s master bath. Currently there's a 34" x 34" shower stall that we plan to make 34"x 60" walk in shower by removing a linen closet in the kids bathroom that the master bath butts up to. We'd like to go with a Swanstone shower panel system, but do not want the entire front 60" wall of the new shower to be all glass; instead we want half of that wall to be a solid wall and the other half to be glass with the shower door. We want to keep half of the front wall solid because the side of our vanity butts up to this wall and if we switched it to all glass, then we'd have to go with a smaller vanity which we don't want to do. All the Swanstone kits we've seen only come with panels for 3 wall (the 2 end walls and the back wall). I'm sure I could buy a 4th panel for half of the front wall but how would that attach to the Swanstone floor pan? Do they make floor pans with a lip on the front side to make a water tight seal like on the other 3 sides?

Anyone know of any reputable sites that allow me to design my own bathroom vanity by choosing from various options? I know Home Depot has their own design system online, but I'm hesitant about the quality (walking through my local Home Depot, I am NOT impressed with the vanity quality - drawers not straight, doors not level, etc.). I also found a design tool online from some random company, but it seems those vanities end up costing like $2k. That's a bit over our price range by a bit more than double. We don't need an amazing vanity. Just something in the 30" range with a basic design for a 3/4 guest bathroom downstairs. Any advice or sites, etc., would be greatly appreciated! Thanks!