Question on grab bars in shower


  #1  
Old 09-23-19, 02:48 PM
H
Member
Thread Starter
Join Date: Jan 2002
Location: midwest
Posts: 296
Likes: 0
Received 0 Likes on 0 Posts
Question on grab bars in shower

Have not used this forum for several years....now trying to post question but not finding the right area. Can someone forward this to someone that can help me out......have a question on grab bars in shower


Mod note: Post forwarded here. Member will be back to post the question
 

Last edited by PJmax; 09-23-19 at 04:45 PM.
  #2  
Old 09-25-19, 10:47 AM
H
Member
Thread Starter
Join Date: Jan 2002
Location: midwest
Posts: 296
Likes: 0
Received 0 Likes on 0 Posts
Several years ago we installed a "Aqua Tub & Shower" this was a complete unit. Now I need to install grab bars. Is it sufficient to put a 3/4 inch plywood on the back to screw in the grab bars. I can remove some drywall to do this. The studs are not in right spot.
 
  #3  
Old 09-25-19, 12:54 PM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Jersey
Posts: 71,014
Received 3,181 Likes on 2,856 Posts
I always try to catch at least one stud at one end.
Plywood in the wall will work but can be tough to get in place where needed.

In the link below is a fastening system that I have used and does work.
WingIts hollow wall mounting system
 
  #4  
Old 09-25-19, 01:28 PM
N
Member
Join Date: Jan 2012
Location: Canada
Posts: 2,743
Received 20 Likes on 18 Posts
Absolutely love these ones. https://www.homedepot.com/p/5-Pieces...3782/204273421

That being said, they are only as strong as your wall.
I would almost consider suggesting a piece of sheet stainless steel (1/16 - 1/8" thick) on the backside and bolt to that. It will distribute the possible load (impact) across more of the tub.
 
  #5  
Old 09-25-19, 05:42 PM
Norm201's Avatar
Member
Join Date: Sep 2013
Location: United States
Posts: 11,497
Received 625 Likes on 555 Posts
I'm not saying what the other have suggest won't work. But if it was me I would most definitely want both ends of grab bar into wood studs. You can do this by slanting a grab bar that is at least 20 inches long until each end corresponds to studs at 16 inch centers.
 
  #6  
Old 09-26-19, 03:41 AM
M
Forum Topic Moderator
Join Date: Mar 2005
Location: USA - N.E.Tn
Posts: 49,335
Received 702 Likes on 619 Posts
.... and if you can access the backside to add plywood - why not add a 2x instead?
 
  #7  
Old 09-26-19, 11:13 AM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Jersey
Posts: 71,014
Received 3,181 Likes on 2,856 Posts
The problem is you are working with a 4" depth.
Unless you cut a massive hole you aren't going to get much of anything useful in the wall unless there is access to that wall from behind..
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: