I need to re-caulk my bathtub which is also used for taking showers, but I've been dreading doing the job because I will have to remove the old silicone caulk. I've heard it's a tough job to do right, and, if you don't do it right, the caulk that you replace it with will not adhere to the tub and tile surfaces properly. Also, I've read that even if you do a good job of removing the silicone with a razor blade tool, there will still be a thin layer of silicone film left behind and that can be a problem. I've looked at Amazon.com reviews of silicone caulk removal chemical solutions, and some folks say they do a good job and others say they're a waste of time and money. I've also heard that heating the caulk with a hair dryer or heat gun can make the job a lot easier. What's the best way to do the job right?

Hello All, I am starting to plan a bathroom remodel. It is a standard bathroom with 1 sink, toilet and tub/shower. I am going to get rid of the tub and install a shower. I plan on doing the demo myself. I also want to move the plumbing for the shower to the right side. Currently the shower plumbing is on the left hand side as your face the tub/shower. How much should I expect to pay to have the bathroom floor and shower retiled, vanity with sink installed and plumbing moved. Pic of current bathroom. It's not huge. [img]https://cimg8.ibsrv.net/gimg/www.doityourselft.com-vbulletin/2000x1504/img_0706_9945e5b06524db45025b256eb0bea37fbaafc5b2.jpg[/img] [img]https://cimg9.ibsrv.net/gimg/www.doityourselft.com-vbulletin/2000x1504/img_0708_88364b255c1fea71e309acaede5bf2652e134c13.jpg[/img]