DoItYourself.com Community Forums > Interior Improvement Center > Doors, Skylights and Windows

window sash repairs

Thread Tools

Search this Thread

02-16-03, 07:15 PM

jerryhndy

Visiting Guest

Posts: n/a

window sash repairs

Have a metal framed vertical opening window. It has the name
"JASON" on the 2 locks. I need to know how to get into/repair the spring assembly on both sides. At this time, one side moves with the window, the other, is fixed at the top. Which is correct??
Any help would appreciated. Thanks, Jerry

P.S. These windows are common in the Southwest. Arizona

Upvote

02-18-03, 04:35 AM

Donna Pallas

Visiting Guest

Posts: n/a

NO ADVERTISING IN FORUMS!!

Advertisements within the forums is not allowed.

Ads, advertisements, solicitations to buy or sell products, services or solicitations to hire a person, company to do work are not allowed within the forums.

Advertisement Policy and Disclosure Statements:

This forum topic nor any other forum topic on this web site was not intended to be used as a public bulletin board for the free posting of ads, solicitations and/or advertisements of any kind.

Forums and their topics where intended to be used to exchange helpful problem solving methods and solutions to questions and not intended to be used as a public advertisement bulletin board.

Unfit and inappropriate postings not relevent to the intent of this web site, postings containing ads, advertisements, solicitations or any such postings deemed as such by the hosts, administration, or moderators of the forums will be edited and or deleted without prior notice.

Kindly direct your advertisements to our advertisement department using the "receive advertising info" link provided on the bottom of every web page.

To solicit a contractor or company to perform services for you, please use the: "Get Matched with PreScreened Local Contractors" pictorial link provided on the top right hand side of every web page.

Do not use email communications or PMs to send ads, advertisements or solicitations to our members or moderators. Our members email addresses and Personal {PM} Message services are not intended to be used for advertisement or solicitations of any type.

Failure to comply with these policy rules, any part of the policy rules, will result in loss of membership privileges allowed on this web site.

If anyone has any objections to this policy, I encourage you to contact the website administrator directly and state your objection.

The "Contact Us" link is provide below for your convenience.

Website Host & Moderator
twelvepole

Last edited by twelvepole; 08-10-03 at 10:36 PM.

Upvote

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Doors, Skylights and Windows
Installing window unit

L

Learning2 on Feb 17, 2003

My old house has a picture window unit: 2 doublehung windows border a 54x60 inch plate glass window. The center glass is not insulated and 50 years of condensation has rotted the sill and underlying framing such that the glass in sagging. I plan to remove the center glass panel, replace any rotted framing studs, cripples, etc., and install a new insulated glass panel. How to I install this unit? Does it sit on some sort on cushioned sill?. We get temp ranges of -15 to +105 degrees so it needs to be framed right! Thanks for your advice.Read More
Doors, Skylights and Windows
Painted wood replacement windows versus vinyl?

Z

zitsky on Feb 16, 2003

Hi everyone. I've recently started educating myself about replacement windows. I could use advice about whether to go with new wood or wood clad windows versus vinyl. The existing wood windows and trim are painted white on the interior, and are covered by white Hunter Douglas venetian blinds. I'm trying to decide whether white vinyl windows would look different enough that it would drastically change the look of the house. I own a 100 year old house in northern California. It is a terrific house with high ceilings, beautiful wood trim around the windows and doors. The roof overhangs the windows by about 2-3 ft, so rain is not much of a problem. The previous owners took very good care of the house. For some reason though, they never replaced the seven double hung, single pane windows in the house. My primary concern is to minimize any changes in the appearance of the house itself. I'm considering whether to replace these windows. I want to do this primarily for energy efficiency, but also to cut down on noise from a major street close to the property. The master bedroom is on a corner of the house and has a window on each side. It gets quite cold at night in that bedroom and the rest of the house. During the winter, we keep it at 68 degrees during the evening, but it is common for it to be 50 degrees when we get up the next morning. I like the idea of having modern wood windows. I think having new wood windows will minimize the impact, but will that really make a difference if the interior will be painted white anyway? Already I have talked to one rep about Anlin vinyl windows. Anlin is a local company. I can't find much information about them in the newsgroups, although they do have a website. The price was quite reasonable, at less than $5000 for 7 large windows, including one bathroom window with tempered glass. I just met with a sales person who was representing Renewal by Andersen. They have their Fibrex product which was 2-3 times the price of the vinyl product we had looked at. I've also gone to a showroom to look at Milguard, Marvin and Andersen windows. I don't have prices on those yet. I'm also thinking to look at Pella windows. I'm leaning towards Marvin, because of their good reputation and wood products. I don't want to go with aluminum clad exterior on the outside. It does look nice, but I'm concerned it will change the character of the house. Any advice about whether to go with vinyl versus wood? Also, would adding storm windows to the exterior be a better choice than replacing the existing windows? I understand you get some these days which can be opened for ventilation. Thanks for any advice and suggestions! --MarkRead More

Ask a Question