bought a house in june of 2006 (bank repo) and the repairs and fixes have been endless. we immediately put new locks on both doors (no deadbolts yet) ourselves. the house was built in 1950 and has old wooden doors. i lock my house every night (of course), but one night a few months ago, i noticed that even though the door was locked, and pushed closed, you could pull it right back open! it's not as easy to do from the outside, but you can actually push the door open from the outside, too, when it's locked. aside from getting a new door, what can i do to repair this lock? i don't believe it's the doorknob or lock itself, but rather where the bolt sits in the strike plate. what are my options here? please help. i am a total noob at this stuff. :)

I want to DIY but don't know. I've searched this board on egress and did alot of reading. Also read the popularmechanics.com journal on installing egress. Our finishing plan for the basement is adding 2 bedrooms, 1 bath (full - already roughed), the rest is rec room/storage. The laundry room is there already. Anyways, I read the code on minimum egress size... Minimum opening area: ≥ 5.7 sq. ft. Minimum opening height ≥ 24” Minimum opening width: ≥ 20” Our current basement windows are 32'' (width) by 20'' (height). The width minimum I meet, the height would require cutting down only one block (basement is block). I've read the pro's charge alot to cut/install egress ($2k - $5k), but since I don't need alot of depth cut out, how much of a price would you think I'd be looking at? Also, cutting down to that depth also would leave the sill above ground, but then I exceed the.... Sill height of window above floor: Not to exceed 44” So, if the sill is still above ground after cutting, is there something I can install on the inside of the room as in a form of a built in ladder or similar to account for the floor to sill height maximum? Or do I have to cut down the block to meet the "floor to sill" and install larger windows.