Trimming hollow doors
#1
Member
Thread Starter
Join Date: May 2008
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts

I visited your website earlier today for the first time, as I have just had a new carpet laid and the doors needed to be trimmed. In the past have used an electric plane with abismal results. Today I folowed the advice of the experts and purchased a circular saw, plus a fine toothed blade. Used the jig recommended and achieved perfect results.
My grateful thanks go to the experts.
PS. The hardest part of the job was getting the screws out of the hinge plates. A couple had to be drilled out in the end!
My grateful thanks go to the experts.
PS. The hardest part of the job was getting the screws out of the hinge plates. A couple had to be drilled out in the end!