Velux WLC 160


Old 02-03-16, 06:41 PM
Thread Starter
Join Date: Feb 2016
Location: USA
Posts: 1
Velux WLC 160

I just replaced my old burned out WLC 100 with a WLC 160. The skylights open just as they did in the past, but when I tried to close them, the motor operated for about 1 second and stopped. The only way I could get the skylights closed was to unplug the controller, wait a few seconds, plug it back in and press the down button again. I had to do this about 100 times because the motors would only operate for 1 second each time, moving the skylights a fraction of an inch each time. Can anyone help me?
Sponsored Links
Old 02-03-16, 10:26 PM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Northern NJ - USA
Posts: 50,967
Likes Received: 155
Welcome to the forums.

Not sure of the differences between the WLC-100 and the 160 but see if this thread is of any help.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes