I have a couple of steel exterior doors that I haven't been able to identify the manufacturer for. They both have "VIRGINIA" with an indecipherable logo stamped on the middle hinge. I've attached pics. I'm looking to get new weatherstripping for these doors and would like to order from the manufacturer if possible. Can anyone identify this manufacturer? Thanks! [ATTACH]75640[/ATTACH] [ATTACH]75641[/ATTACH] [ATTACH]75642[/ATTACH]

Bought an old house. The dryer vent was ran through a basement window (old window, all aluminum with two 12hx15w separated single glass panes). The pane on the side the dryer vent exited had been removed and replaced with a very thin piece of sheet metal (tin?) and had a hole cut into it for the 4" vent hood to be installed in. When replacing the vent hood I went ahead and fitted a polycarbonate sheet instead of the tin. I know it isn't the best but it's better than what was there. What should I use to install the poly sheet in the aluminum window frame? A glaziers point wont tap in unless I force it through the metal, and I'm suspect of just using caulk/silicone. The stuff that's on there now looks like grey putty (or even mortar) so I assumed it was some type of glazing but honestly I have no idea. I just don't want anything that reacts with the poly and actually holds in a wind storm. Sorry, I'm a total noob at windows. Thanks guys. Brian