How am I going to build this door?

Reply

  #1  
Old 11-24-17, 08:40 PM
Member
Thread Starter
Join Date: Mar 2017
Location: USA
Posts: 1
Upvotes: 0
Received 0 Votes on 0 Posts
How am I going to build this door?

Hi all,

Thanks in advance for sharing your expertise. So I want to build a door/wall to separate the commode from the rest of the bathroom. Its sort of an awkward angle - how would you recommend I go about installing an interior door? Any advice?

Images attached for your convenience
 
Attached Images    
Sponsored Links
  #2  
Old 11-24-17, 09:16 PM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Northern NJ - USA
Posts: 51,477
Received 216 Votes on 205 Posts
Welcome to the forums.

Do you just want a privacy door or do you want to block the entire commode area off ?
If you want to block off the entire area you will need to build a wall over the top of the door.
 
  #3  
Old 11-25-17, 12:40 AM
Marq1's Avatar
Member
Join Date: Sep 2016
Location: USA MI
Posts: 4,050
Received 69 Votes on 62 Posts
Appears like you might have enough room for the door to swing inward to the left, will have to tear out the drywall at the opening to install an interior door, lot of work but appears doable!
 
  #4  
Old 11-25-17, 03:01 AM
XSleeper's Avatar
Group Moderator
Join Date: Dec 2004
Location: USA
Posts: 22,769
Received 137 Votes on 129 Posts
Question is, what is the width of the opening (angled part bottom photo drywall on left to drywall on right.)

And what is the distance from the front left corner, bottom pic to the angled 135 degree inside corner on the left?
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes