Removing exterior door threshold

Reply

  #1  
Old 12-21-17, 05:47 PM
Member
Thread Starter
Join Date: Oct 2005
Location: Florida
Posts: 1,453
Removing exterior door threshold

I have this exterior door and I would like to replace the aluminum threshold.

I assume this is the original threshold and am wondering that is the best way to take out the old threshold.



Original floor is terrazo as you can see on the outside. The inside is tiled over the terrazo so it's a bit higher.

How is the threshold connected to the door jamb? Is it nailed/screwed from the bottom up into the end of the jamb? Is so then there is very little chance of removing it without tearing up the jamb bottom? I do not see any screw holes, so I don't think it's screwed into the concrete floor.

If I take an angle grinder with a metal blade and cut across the existing threshold, can I wiggle and finesse out each half of the threshold without damaging the wood jamb?
 
Sponsored Links
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes