Go Back  DoItYourself.com Community Forums > Interior Improvement Center > Doors, Skylights and Windows
Reload this Page >

Reclaimed glass blocks with mortar-covering tabs

Reclaimed glass blocks with mortar-covering tabs


  #1  
Old 07-15-18, 08:30 PM
J
Member
Thread Starter
Join Date: Jul 2018
Location: USA
Posts: 1
Upvotes: 0
Received 0 Upvotes on 0 Posts
Reclaimed glass blocks with mortar-covering tabs

I am about to make a small glass block window in a remodeled master bath using reclaimed glass block from our local recycling store. Unlike most glass blocks, these old ones have tabs on two sides. The only practical application for them that I can see is to render the mortar joints in one direction invisible by covering them.

So, we have decided to install them so that only the vertical mortar joints are visible, and the horizontal joints will be covered by these tabs. What that means, practically, is that I believe that I must install the bottom course with a shim on one side (in order to create a plum installation), and trim all of the spacers that I use so that they will have only vertical components. (The glass tabs on the tiles don't allow room for the horizontal part of the spacers.) And I probably need a corresponding shim at the top.

Has anyone ever encountered this sort of block, and is there anything else that I should know before I start?
 
  #2  
Old 07-16-18, 02:03 AM
Marq1's Avatar
Member
Join Date: Sep 2016
Location: USA MI
Posts: 9,745
Received 1,210 Upvotes on 1,098 Posts
I believe the tabs are used as spacers so the mortar joint is consistant thickness, is that how you are planning to install?
 
  #3  
Old 07-16-18, 03:36 AM
XSleeper's Avatar
Group Moderator
Join Date: Dec 2004
Posts: 27,194
Received 1,946 Upvotes on 1,746 Posts
I've never seen a glass block that comes out if the box with any kind of tab, unless you have something that is acrylic instead of glass. A picture of what you have might help if we could see it.
 
  #4  
Old 07-16-18, 05:00 AM
Norm201's Avatar
Member
Join Date: Sep 2013
Location: United States
Posts: 10,969
Received 727 Upvotes on 643 Posts
These are reclaimed (used) glass block from a recycle place. Who knows how and where they were used?
I agree, I would like to see a picture of the block and where are you using them.
 
  #5  
Old 07-16-18, 05:28 AM
P
Group Moderator
Join Date: Mar 2003
Location: NC, USA
Posts: 27,956
Received 2,227 Upvotes on 1,987 Posts
Here are instructions how to post pictures.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: