Door Binding

Reply

  #1  
Old 06-24-19, 09:21 AM
Member
Thread Starter
Join Date: Oct 2013
Location: USA
Posts: 44
Door Binding

I took my front door off to paint it. Took all of the metal off. When I put the hinges back on and tried to hang it, I could not get the hinges all aligned. Once I had 2/3 pins in, I unscrewed the 3rd (top) hinge from the door, pinned it, and then screwed it back into the door.
It's always been a little off, but now it really hits at the upper jamb and you can see the uneven gap at the header.

Should I chisel out the mortise at the top to straighten up this door? Or how should I fix?
 
Attached Images  
Sponsored Links
  #2  
Old 06-24-19, 10:12 AM
XSleeper's Avatar
Group Moderator
Join Date: Dec 2004
Location: USA
Posts: 22,540
Likes Received: 104
You generally want to put a 3" long screw through one of the top hinge holes that is closest to the weatherstripping. That will usually suck the hinge tight to the studs behind and will raise the leading edge of the door just slightly and pull it away from the jamb... enough so that it doesn't rub.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes