Andersen Series 400 patio pre-2005 adjustment
#1
03-22-23, 10:42 AM
Join Date: Jan 2007
Location: MA
Posts: 487
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Andersen Series 400 patio pre-2005 adjustment
Hello all,
I have a Andersen Series 400 pre-2005 in swing patio door and looking for advice on hinge adjustment. I have reviewed Andersen's instructions and have gotten the horizontal adjustment perfect. The vertical instructions say to vertically adjust simply turn bottom hex screw at bottom of hinge. This appears to be just a cap and wondering if anyone knows if there is a 2nd allen screw behind this that actual performs adjustment. Just a little nervous to remove "cap" not knowing what is behind it.
Thank you in advance !
I have a Andersen Series 400 pre-2005 in swing patio door and looking for advice on hinge adjustment. I have reviewed Andersen's instructions and have gotten the horizontal adjustment perfect. The vertical instructions say to vertically adjust simply turn bottom hex screw at bottom of hinge. This appears to be just a cap and wondering if anyone knows if there is a 2nd allen screw behind this that actual performs adjustment. Just a little nervous to remove "cap" not knowing what is behind it.
Thank you in advance !
#2
03-22-23, 10:52 AM
Group Moderator
Don't know what cap you're referring to. Look at the pdf at:
http://www.allaboutdoors.com/article...articles_id=76
http://www.allaboutdoors.com/article...articles_id=76
