Zone Valve


  #1  
Old 10-02-08, 04:49 PM
P
Member
Thread Starter
Join Date: Sep 2008
Posts: 20
Upvotes: 0
Received 0 Upvotes on 0 Posts
Zone Valve

I am now attempting to connect two zone valves to my Honeywell aquastat. The one on the first floor is a new Honeywell zone valve and I have that working great. The one on the second floor was in the system before just left open all the time. I want to connect this one to the system as well. The name on the motor cover is Synchron. It has two red wires coming out the front. It also has a yellow and orange wire that had been spliced together. I have been trying to connect this valve and have no luck at all.
 
  #2  
Old 10-03-08, 04:30 PM
S
Member
Join Date: Sep 2008
Location: Long Island
Posts: 695
Upvotes: 0
Received 0 Upvotes on 0 Posts
the 2 red wires are the 24V from the TR up to the stat.the 2 wires tied together are the end switch...to close when the valve opens on call for heat,and opens when it shuts the heat to the zone stopping what is tied into it
 
  #3  
Old 10-04-08, 07:24 AM
P
Member
Thread Starter
Join Date: Sep 2008
Posts: 20
Upvotes: 0
Received 0 Upvotes on 0 Posts
Nothing is connected to it. I know I need to connect the low voltage and run the zone to the aquastate but donít know how.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: