Replacing bearing roller assembly on Maytag dryer
#1
02-02-05, 01:26 PM
Replacing bearing roller assembly on Maytag dryer
My Maytag dryer (model #SE7800 - stacked washer/dryer) is 13 years old and has begun making a sound as if an airplane was flying overhead. I spoke to the Maytag Rep and a Parts Rep and both seem to think that the problem could be the bearing roller assembly. Do you concur? I have downloaded a diagram of the tumbler for my model dryer from the Maytag website, but I do not know how to access the bearing roller assembly in order to switch it out. Any assistance would be greatly appreciated.
#2
02-03-05, 11:36 PM
Banned. Rule And/Or Policy Violation
Join Date: Nov 2004
Location: langley, in sunny fraser valley, bc , near vancouver
Posts: 1,070
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Hi Laurel,
- i haven't worked on that model, nor can I find a diagram of it. However, many Maytags have bearing rollers under the rear end of the drum. You will need to remove the drum to get at this.
Do it Right - Do it once.
- i haven't worked on that model, nor can I find a diagram of it. However, many Maytags have bearing rollers under the rear end of the drum. You will need to remove the drum to get at this.
Do it Right - Do it once.
