Laying washer on its' side a problem?
#1
02-07-05, 02:43 AM
Laying washer on its' side a problem?
I recently repaired my Roper Direct Drive washer, but laid it on its side during the repair. Now it makes a loud banging noise during the spin cycle. What can be the cause of this - I'm having trouble locating diagrams that might help me determine what is out of place.
#2
02-07-05, 08:14 AM
Banned. Rule And/Or Policy Violation
Join Date: Nov 2004
Location: langley, in sunny fraser valley, bc , near vancouver
Posts: 1,070
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Hi sneech,
- check under the drum for springs, dampers etc, that may have come loose or broken. Also the drum may not be fully on all the rollers.
Do it Right - Do it once.
- check under the drum for springs, dampers etc, that may have come loose or broken. Also the drum may not be fully on all the rollers.
Do it Right - Do it once.
